XAHonor's N Jack To N Jack RF Adapter

1.Body:Brass/Nickel Plated 2.Insulator:PTFE 3.Center contact: Phosphor Bronze/Gold Plated 4.Certification:RoHS/ISO9001:2008

XAHonor's Crimp Type N Jack RF Connector For RG58 LMR195

The Type N offered the first true microwave performance. The Type N connector was developed to satisfy the need for a durable, weatherproof, medium-size RF connector with consistent performance through 11 GHz. There are two families of Type N connectors: Standard N (coaxial cable) and Corrugated N (helical and annular cable). Their primary applications are the termination of medium to miniature size coaxial cable, including RG-8, RG-58, RG-141, and RG-225. RF coaxial connectors are the most important element in the cable system. Corrugated copper coaxial cables have the potential to deliver all the performance your system requires, but they are often limited by the performance of the connectors.Intermodulation distortion, a major concern in today's communications systems, is consistently low with corrugated cable connectors. Typical performance is -125 dBm (-168 dBdc). In-house IMD measurement capability gives XAHonor the unique ability to understand the effects of connector design elements on IMD generation and to design the best performing connectors in the industry. Self-flaring designs are easily attached with standard hand tools in the field, and are highly resistant to pull off and twist off. All corrugated cable connectors are optimally matched to their cables for low VSWR and insertion loss.

 

Features & Benefits

•	Accommodates a wide range of medium to miniature-sized RG coaxial cables in a rugged medium-sized design
•	Broad line of Military (M39012), Industrial (UG) and Commercial (RFX) grade products available, giving customers choices in weighing cost versus performance benefits
•	Meets many customer application demands with plug styles available in straight and right angle and jack styles available in panel mount, bulkhead mount, and receptacle

 

Applications

•	Antennas	•	Base stations	•	Broadcast
•	Cable assemblies	•	Cellular	•	Components
•	Instrumentation	•	Microwave Radio	•	Mil-Aero
•	PCS	•	Radar	•	Radios
•	Satcom	•	Surge Protection	•	WLAN

Type N Standard Specifications 

Electrical
Impedance	50 Ω
Frequency Range	0 - 11 GHz
Voltage Rating	1,500 volts peak
VSWR	MIL-C-39012 straight connectors: 1.3 max 0-11 GHzMIL-C-39012 right angle connectors: 1.35 max 0-11 GHz
Dielectric Withstanding Voltage	2,500 volts rms
Insulation Resistance	5,000 MΩ minimum
Center Contact Resistance	1.0 mΩ
Outer Contact Resistance	0.2 mΩ
RF Leakage	-90 dB minimum at 3 GHz
Insertion Loss	.15 dB maximum at 10 GHz
Mechanical
Mating	5/8-24 threaded coupling
Braid or Jacket Cable Affixment	All crimps: hex braid crimpClamps: screw-thread nut and braid clamp
Center Conductor Cable Affixment	Crimp: crimp or solderAll others: solder only
Captivated Contact	All crimps unless specified otherwise
Cable Retention	Crimps: 60-120 lbsClamps: 30-70 lbs
Material
Male Contacts	Brass, silver or gold plated
Female Contacts	Phosphorous bronze or beryllium copper, silver or gold plated
Other Metal Parts	Brass with ASTROplate® finish; M39012 has silver finish
Insulators	TFE, copolymer of styrene or glass-TFE (hermetic seal)
Weatherproof Gaskets	Silicone rubber of synthetic rubber
Crimp Ferrule	Copper
Environmental
Temperature Range	TFE: -65°C to +165°C
Weatherproof	All series N with gaskets are weatherproof
Hermetic Seals	Pass helium leak test of 2x10-8 cc/sec
Pressurized Shock	Compression seal MIL-STD-202, method 213
Vibration	MIL-STD-202, method 204, test condition B
Moisture Resistance	MIL-STD-202, method 106
Corrosion	MIL-STD-202, method 101, test condition B
Temperature Cycling	MIL-STD-202, method 102, test condition C
Altitude	MIL-STD-202, method 105, test condition C
Military
MIL-C-39012MIL-A-55339	Where applicable

Note: These characteristics are typical but may not apply to all connectors.

--------------------------------------------------------------------------------------------------------------------

DRAWING

------------------------------------------------------------------------------------------------------------------------------------

XAHonor Scien-Tech Co., Ltd., a well-known manufacturer and supplier specialized in the development, manufacture and sale of R.F coaxial connectors, cable assemblies, matched terminals, micro-wave components and communication structure products, is located in Xi'an Electronic Industry Garden of Xi'an Hi-Tech Development Zone, China.

 

We manufacture the following products: 1) RF coaxial connectors and adapters up to 50GHz 2) Flexible, semi-flexible and semi-rigid Cable Assemblies up to 40GHz, we test each cable assembly for your order with the test report.3) RF Impedance converter 75 ohm to 120 ohm, such as BNC and 1.6/5.6 (L9) type.

 

Our Quality:Quality is the life of XAHonor. We use only the best quality (original) components to ensure the standard of our product range is of the highest caliber.All products we sold out are strictly selected and tested by our QC department.

 

Warranty:We provide comprehensive after-sales service, including quality service, guidance services,We focus on customer needs in every detail.Please contact us if you need our detail warranty term.

 

Payment:We accept payment via TT (Bank transfer), Western Union, Escrow.We accept bank transfer for large orders. For small order, you'd better pay via Western union or Escrow.

Shipping:We offer as many shipping options as possible, including DHL, UPS, TNT, Fedex and EMS.

Do you have any question? Contact me now! We look forward to cooperating with you!

XAHonor's N Jack To N Jack RF Adapter