XAHonor Scien-Tech Co., Ltd.
Main products:Rf Coaxial Connetor,Rf Coaxial Cable Assembly,Rf Coaxial Terminal,Rf Adapter,Lf Connector
Products
Contact Us
  • Contact Person : Ms. Zhang Lilian
  • Company Name : XAHonor Scien-Tech Co., Ltd.
  • Tel : 0086-29-8822 9816
  • Fax : 0086-29-8825 3165
  • Address : Shaanxi,xi'an,Building 702, Xijing International Electrical Center,No.3 West street Dianzi Road Xi'an
  • Country/Region : China
  • Zip : 710065

BNC Straight Female to BNC Female Bulkhead RF Adapter 50ohm Impedance

BNC Straight Female to BNC Female Bulkhead RF Adapter 50ohm Impedance
Product Detailed
BNC Straight Adapter BNC-KYK 1.Body:Brass 2.Plating:Nickel Plated 3.Insulator:PTFE 4.Certification:RoHS/ISO9001:2008

BNC Straight Female to female Bulkhead RF Adapter 50ohm Impedance

The BNC product line is a miniature quick connect/disconnect RF connector. It features two bayonet lugs on the female connector; mating is achieved with only a quarter turn of the coupling nut. BNCs are ideally suited for cable termination for miniature to subminiature coaxial cable (RG-58, 59, to RG-179, RG-316, etc.) XAHonor 50 Ω BNC connectors are miniature, lightweight units designed to operate up to 11 GHz and typically yield low reflection through 4 GHz. Designed to accommodate a large variety of RG and industry standard cables, BNC connectors are available in crimp/crimp, clamp/solder, SURETWIST, and field serviceable termination styles. A full line of printed circuit board receptacles, bulkhead receptacles, resistor terminations, and other accessories complement the product offering. A variety of our 50 Ω BNC connectors are recognized under the Component program of Underwriters Laboratories, Inc. These connectors are ideal for use with medical equipment and test instrumentation where safety cannot be compromised. XAHonor also offers a full line of 75 Ω BNC connectors to meet the needs for higher performance impedance-matched cable interconnections. These connectors can be used in a variety of applications where true 75 Ω performance is needed to insure low signal distortion. Designed for the most popular 75 Ω cables used in broadcast and CATV applications as well as for plenum and other cables, these connectors feature crimp-crimp cable affixment for quick and reliable installation. Two distinct types of 75 Ω BNC's are available, and both mate with each other and with 50 Ω BNC's. Type 1 is designated 75 Ω BNC-T1 and provides constant 75 Ω performance with low VSWR DC 4 GHz. Type 2 is designated 75 Ω BNC-T2 and is usable with low reflection DC - 1 GHz. For applications above 1 GHz, Type 1 is recommended. Part numbers that are listed with the appropriate M39012 number are military grade connectors produced in accordance with and actively qualified to the military specification MIL-C-39012. Connectors not listed with the M39012 number constitute the industrial grade product offering. These connectors provide comparable performance and generally feature nickel-plated brass bodies, Teflon insulators, and either gold or silver-plated center contacts. XAHonors commercial grade connector offering carries the part number designation RFX for easy recognition. These low-cost connectors typically utilize die cast and molded components. While performance will not be equal to the industrial or military grade products, these connectors are ideal for use on a variety of commercial applications. Reverse Polarity BNC's are also available. Reverse polarity is a keying system accomplished with a reverse interface, and ensures that reverse polarity interface connectors do not mate with standard interface connectors. XAHonor accomplishes this by inserting female contacts into plugs and male contacts into jacks. Other manufacturers may use reverse threading to accomplish reverse polarity keying.

Features & Benefits
• Bayonet coupling mechanism provides quick mating and unmating
• 50 Ω and 75 Ω impedance designs allow customers to match impedance to system requirements
• 50 Ω and 75 Ω connectors are intermateable to ensure non-destructive mating
• Three grades of connectors are available for military, industrial and commercial applications
Applications
• Antennas• Automotive• Base Stations
• Broadcast (75 Ω)• Cable Assemblies• Cable Modems
• Components• Computers/LANs• Instrumentation
• Oscilloscopes• Medical Equipment• Mil-Aero
• Radios• Satcom• Surge Protection
• Telecom    
50 Ω  Specifications
Electrical
Impedance50 Ω nominal
Frequency Range0-4 GHz with low reflection
Voltage Rating500 volts peak
Dielectric Withstanding Voltage1,500 volts rms
VSWRM39012 straight connectors: 1.3 max 0-4 GHzM39012 right angle connectors: 1.35 max 0-4 GHz
MIL-C-39012 Contact ResistanceCenter contact: 1.5 mΩ; Outer contact: 0.2 mΩ
MIL-C-39012 Insulation Resistance5,000 MΩ
MIL-C 39012 Braid to Body0.1 milliohm
MIL-C-39012 RF Leakage-55 dB min at 3 GHz
MIL-C-39012 Insertion Loss0.2 dB min at 3 GHz
Mechanical
Mating2-stud bayonet coupling per M39012
Braid/Jacket Cable AffixmentAll crimps are hex braid; clamps are screw-thread net and braid clamp
Center Conductor Cable AffixmentCrimps are crimp or solder; all other are solder only
Captivated ContactsAll crimps unless specified otherwise
Cable RetentionCrimps: 20-100 lbs; All others: 30-70 lbs
Material
Male ContactBrass
Female ContactBeryllium copper or phosphorous bronze, silver or gold-plated
Other Metal PartsBrass, nickel finish; M39012 is silver finish
InsulatorTFE, copolymer of styrene, glass-TFE (hermetically sealed)
Crimp FerruleCopper/brass
Environmental
Temperature RangeTFE insulators: - 65°C to + 165 °CCopolymer of Styrene: - 55°C to + 85°C
WeatherproofClamps with clamp gaskets; crimps with heat-shrink tubing
Hermetic SealsPass helium leak test of 2x10 -8 cc/second
ShockMIL-STD-202 method 202
VibrationMIL-STD-202 method 202, test condition D
Moisture ResistanceMIL-STD-202 method 106
CorrosionMIL-STD-202 method 101, test condition B
Temperature CyclingMIL-STD-202 method 102, test condition D
AltitudeMIL-STD-202 method 105, test condition C
Military
MIL-C-39012Where applicable

Note: These characteristics are typical but may not apply to all connectors.

Our Quality:Quality is the life of XAHonor. We use only the best quality (original) components to ensure the standard of our product range is of the highest caliber.All products we sold out are strictly selected and tested by our QC department.

Warranty:We provide comprehensive after-sales service, including quality service, guidance services,We focus on customer needs in every detail.Please contact us if you need our detail warranty term.

Payment:We accept payment via TT (Bank transfer), Western Union, Escrow.We accept bank transfer for large orders. For small order, you'd better pay via Western union or Escrow.

Shipping:We offer as many shipping options as possible, including DHL, UPS, TNT, Fedex and EMS.

Do you have any question? Contact me now! We look forward to cooperating with you!

BNC Straight Female to BNC Female Bulkhead RF Adapter 50ohm Impedance



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.